Cart 0
-Spartan Armor/Condor MOPC Plate Carrier and AR550 Level III+ Body Armor Platform

-Spartan Armor/Condor MOPC Plate Carrier and AR550 Level III+ Body Armor Platform

$ 345.00

Package includes both front and back AR550 steel armor plates with our patent pending ATC (advanced triple curve) design, two side plates and Condor MOPC. Choose between standard base coat and full coat options.

Note: If ordering the 11x14 plates you will receive the XL Condor MOPC automatically. In addition, if upgrading to 6x8 side plates, suggested with XL carrier, they will be bent horizontally to fit the XL carrier. Comes with 6 x 6 side plates with standard protective coating.

Spartan Armor Systems AR550 Level II+ Armor with Condor MOPC Package

Spartan Armor Systems™ now offers the most affordable PC’s in the industry! Condor is a leading plate carrier manufacturer who offers great gear at affordable prices! These modular plate carriers are the best bang for the buck! Check out the features and you’ll see why Spartan Armor Systems has chosen Condor® for our plate carriers.

-Fits Spartan Armor Systems 10″x12″ and 11”x14” AR500/AR550/Armaply Shooter’s Cut armor plates, SAS IIIA Soft Armor, and our Level IV composites

– Emergency drag handle.
– Detachable shoulder pads.
– Side release buckles on shoulders and internal waist strap.
– Accepts up to 6 x 8 side panel plates.
– Easy access to ballistic plates with pull down flaps.
– Adjustable/detachable cummerbund with pockets for side armor.
– One front map pocket with snap, hook & loop closure.
– All armor compartments (front, back & sides) have hook and loop panel.
– Lightly padded mesh on front and back harness for comfort and airflow.

Level III+ Advanced Triple Curve™ (ATC) Spartan AR550 Armor

We’ve taken our Level III Body Armor to a NEW level! Spartan Armor Systems™ is pleased to introduce our AR550 Body Armor!  With a 10% increase in ballistic core hardness, our level III+ AR550 armor defeats higher velocity threats such as XM193, M855, and M80! We’re special rifle threat validated!

Our AR550 armor hits the “sweet spot” in the Brinnell Hardness (BHN) range. With a core hardness of approximately 545-560 BHN, we have found our  ballistically rated variant of AR550 that we use is perfect for defeating higher velocity threats, while not exposing the armor plate to extreme stress due to forming.

Our AR550 Level III+ armor has our GEN2 lower cut radius. With a 10% increase in core hardness, this ballistic grade steel perfectly hits the “sweet spot”. It’s much harder than AR500, but not too hard to cause severe stress while forming.

Advanced Triple Curve (ATC) AR550 Spartan Body Armor. An industry FIRST! Spartan Armor Systems™ is proud to be the FIRST in the industry to commercially offer triple-curved AR550 body armor. With higher velocity rifle threats commonly present throughout the United States, we’ve developed this AR550 armor to specifically defeat some common threats such as 5.56 x 45 XM193, 5.56 x 45 M855 /SS109 and 7.62 x 51 (.308 Winchester) at a rated velocity of 3,100 fps or less. Additionally, we’ve successfully defeated these threat profiles from Close Quarters Battle (CQB) distances…repeatedly!

 Size:  Choose from 10″ x 12″, or 11″ x 14″

Configuration:   This armor comes as a set, meaning you will receive both front, back and side plates

Level III+ Side Plates:   Choose from either 6″ x 6″ (small) or 6″ x 8″ (large)

Chest Plate Weight (per plate):    10×12 approximately 8lbs 1oz (base coat), 8lbs 10oz (full coat). 11×14 approximately 10lbs 1oz (base coat), 11lbs 7oz (full coat).

Side Plate Weight (per plate):    6×6 approximately 2lbs 9oz (base coat), 2lbs 11oz (full coat), 6×8 approximately 3lbs 6oz (base coat), 3lbs 12oz (full coat).

Thickness:   .25″ AR550 plus approximately .25″ coating (full coat) makes this slim profile plate overall .5-.6″ in total thickness

As with all of our Armor products, we only use the highest grade of AR550 to manufacture our armor! Remember, not all body armor is created equal! Read our “FAQ” to find out more about the AR550 Armor we use to construct our body armor!

Our AR550 armor hits the “sweet spot” in the Brinnell Hardness (BHN) range. With a core hardness of approximately 545-560 BHN, we have found our  ballistically rated variant of AR550 that we use is perfect for defeating higher velocity threats, while not exposing the armor plate to extreme stress due to forming.

 


Share this Product


More from this collection